- PWM Frequency? in PHX Link.
- Old P10 and PHX-Link
- cc 25 problems again
- Pixie 20P - 3S Lipo - Won't run
- Phoneix 25 & 35 problems on 35 Mhz band?
- Phx-Link installation question
- Don't smoke your CC 60 like me :)
- Phoenix 25 'crashes' when programming?
- Pixie20P cut-off and throttle range with a Hitec Focus 3 radio.
- Excellent customer service!! THANK You!
- Phoenix 45 / 12 cells / 4 servos / BEC, asking for trouble?
- Phoenix 25 and Himax 2015/5400 stutters
- Phoenix 25 is it worth keeping?
- MOS-FET (Si4442DY)
- Brand new Pheonix 25 Not working
- help with pixie 20p
- HV esc
- Phoenix 25 does not always get full power
- Pegasus 35 marine version?
- Got a Phoenix 80, how to tell what version is on it?
- Just picked up a PHX-Link, Cool Product
- Did my P10 smoke?
- pixie 20p-cutoff voltage
- 2 ESCs that may need software update
- Mamba 80 for 10th scale trucks
- What controller for twin edf... help
- Servo's Jitter when connected to Phoenix 25
- Phoenix 45 & 60 compatible with Plettenberg Orbit outrunners ?
- How did I smoke my Griffin 45?
- using phoenix 10 becs in parallell?
- Pegasus 35P question.
- li-ion w/pixie 20p
- 400CE, Pixie20, 3S1500 motor cut-off?...
- Max temperature
- PHX LINK locks up when programming
- Programming of Phoenix
- IS the new Phoenix-25 a true 25A rating?
- hey castle, gonna help me out?
- Pheonix 45 dated September 2003 won't work with PHX-link
- CC35 problem with MPX Royal evo TX
- PJS outrunners and Phoenix 10
- CC esc programming for Dummies! (like me!)
- Phoenix-10 and 25 capable of having LiPo's, NiCd's and NiMh's?
- PHOENIX-10 not responing
- PHX45 Max voltage?
- PHX45 Wire Size and Throttle Range
- Phoenix 25 with half programming?
- Phx Link With Bec Disabled?
- Why no On/Off Switch on Pheonix 25?
- pixie 20p flashing red
- Sw Rate different on Phx-Lnk than 9/2 doc?
- To Fuse or Not to Fuse?
- Phoenix-80 max power question
- What PH10 timing advance for axi 2208/20?
- Additions to the Phoenix manuals
- Is there anyway to download to older esc
- Put lost plane alarm in ESC firmware???
- Phoenix 10 problem, excellent service
- Now taking orders for the Mamba-25 & Mamba motor
- PH 10 (Internlal Error-Settings not found for this controller type.
- phoenix 25amp brushless esc
- Fried Phoenix-60 - Scary Failure Mode
- dead cc10
- No Phoenix 45 in latest Phoenix Link software
- PHX-Link for brushed esc?
- Computer link for brushed motors
- Controller I.D.
- P45 Very Soft Start is Very Abrupt On Heli!
- CC 35a BL esc won't swing geared motor
- Patrick-Phx.Lnk anomoly
- Patrick Link reads 35 as 25
- Himax Phoenix 25 problem
- Chatter of AXI motor driven by Phoenix10
- Phx 10 firmware won't load
- PH10 vs. PH25