PDA

View Full Version : Castle Creations

The site map for Castle Creations

Pages : [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
  1. Castle Creations open discussion
  2. Castle Creations Open Discussion V2.0
  3. Another "You just can`t beat CC Customer service."
  4. Castle Creations Open Discussion V3.0
  5. DO castle creations brushless ESC's-different frequency band versions?
  6. Astro Flight 010 w/Speed Control
  7. I think my Phoenix 25 is dead...
  8. The Peonix 25 w/ car program
  9. Problems in governor mode with my Phoenix 45
  10. Problems with Phoenix 10 and Outrunner motor on 3 lipo cells
  11. Castle Creations is Awesome!!!
  12. Ph10/010 Q
  13. Tell us what YOU want!
  14. Messuring current into motor
  15. Pegasus 35 questions
  16. Has Anyone else had Problems with CC ESC`s and Mega Motors?
  17. can Phoenix 25 be programmed for 30 degrees?
  18. Phoenix 25
  19. 5-cell receiver pack parallel to ESC
  20. Pegasus 35
  21. phoenix 35 question
  22. Higher cell counts, Higher Amps?.
  23. P10 + Astro 010
  24. What happened to my pixie 7?
  25. Weekend Emails Lost!
  26. PP efficiency?
  27. Controller for PJS 1000??
  28. Phoenix line of ESC power up question
  29. Pheonix 35 Runaway Start during Range Test
  30. Is my 10A ESC on my AF 010 dead?
  31. P10 and Razor MH question
  32. Strange vibration and pinion slippage...
  33. Phoenix-35 causing glitches?
  34. Phoenix 10 for Razor 350?
  35. AXI 28XX/XX motors compatibility
  36. Brake not working very well.
  37. Phoenix-45 servo rating
  38. Phoenix 10
  39. what timing to use on Razor 300?
  40. max volts versus amp draw for the Phoenix 35?
  41. programming the phoenix 45
  42. Phoenix 35 or 45?
  43. pheonix 60 + aveox 1412/2- frequency?
  44. Why is it not possible to run 2 BL motors with 1 controller?
  45. Phoenix 60 Problems
  46. How many Servos
  47. Pheonix 45 problem??
  48. Phoenix-35 Issue
  49. P45 and 6 cells No Go in Kwik-E
  50. Servo Count for Pixie 20
  51. Outrunner Motor and Phoenix 35 mods
  52. Phoenix 60 governor mode with an Aveox 36/30/2?
  53. Governor Mode Myths
  54. MPJet 25/35/20 and CC Phoenix 35?
  55. Phoenix 80 with 36 mhz Rx in OZ
  56. pixie 7p bec question
  57. Phoenix 60 ROUGH Start and Pulsing Throttle at Idle
  58. Phoenix 10 glitch ?
  59. New Phoenix 35 Mega 16154 cutout problem
  60. shawn, my new pheonix just smoked
  61. pheonix 25 problem
  62. P10 and small outrunners
  63. Phenix 80 Help needed!
  64. USB Phoenix programmer.
  65. Poor Service from Castle Creations
  66. PHOENIX-80 Voltage
  67. my pheonix 35 [updated] works on 35mhz
  68. CC45 setting
  69. P-45 Mega 22/20/3 prpblem
  70. Pheonix 25 Break Operating?
  71. Very odd CC25 failure
  72. When is the Phoenix 25 car software going to be done
  73. Pegasus 35 problem
  74. Phoenix 25 - Mega 16/15/6
  75. Battery Charger