- Turbulator Strips Position
- Polar Plotting results?
- Autogyro design
- Washout and stall strips
- Neutral Point Location for Martin P6M-2
- Cl help needed
- Flying Wing Washout vs Stability
- Gyros on 3D machine
- How to calculate CG on a Bipe
- Estimating sink rate?
- rounding fuse corners?
- Flashing LED's - How???
- I need some suggestions......
- Bizzare Prop Balance....
- The effect of positionning elevons on the inside of a 2 peice-wide wing..
- COG on round wing?
- Airfoil for a foam flying wing sloper
- Antenna Expertise
- Left thrust?
- Flying tail... how not to...
- Airfoil for a WWII Bipe
- help with inverted v-tail trim
- Source for small quantities of SMT components
- What minumum thrust is needed ?
- Neutral Point and CG program (free, 98, XP)
- Anyone need e-Flight Project Power Supplies?
- Voyager Kit?
- Low Speed Theodorsen-Betz Propeller Testing With Schmitz Airfoil Data
- Tailplane area ratio? How big should I make it?
- What's an airplane and what isn't?
- Switch rated 3A at 125VAC - how many DC amps ?
- Why swept or delta shape flying wings
- How do folding and non-folding props compare?
- Help Finding Balanceing Point
- Constant cord wing for sloper?
- PC to RC interface
- Good Design Reference Book??
- Airframe weight vs Power system weight
- My plane rolls when I give up elevator??
- Q about fighting wind or maybe wing incidence
- Top R/C Gun AWS Combat System Project
- A Whole New Can of Worms...
- Changing Cutoff voltage on GWS ICS400 or ICS400E ESC
- Polars and Reynold’s number
- Buffer packs, BEC and schottky diodes
- How does changing thickness effect airfoil characteristics?
- Hacking into the FIrebird XL
- C of G confusion
- Shear web theory ?
- Choosing airfoils based on calculated polars
- How do Heli control works?
- max speed computation
- Electric Props efficiency/ allround
- flight characteristic questions
- Determining WS for a desired weight
- Will My Idea Fly??
- Delta flight characteristics ?
- Dutch Roll
- Changing the sweep?
- Canard AOA?
- HELP on calculating MAC on a forward swept wing?
- Extension wire question
- Need electronics help
- 700 degree soldering
- Thickening airfoil to reduce stall speed?
- Center of pressure on flat plate?
- PVC based model stand
- Bernoulli, Newton or a bit of both?
- Homebrew ESCs
- Questions on wing structure
- Control throw question
- How to determine CoG of a seni-circular wing
- Wash IN vs. Wash OUT
- CAD drawings for astro flight motors...
- Tipletts?