- science of aerodynamics
- Perfect C/G hard to find!!
- Kryptonizers (movable SFGs)
- Small wing on the front, like a canard??
- Stall Speed, Prop Pitch Speed,..what's the sweet spot?
- CG for Zagi Wing
- Aircraft design in a nutshell
- Flaps
- Space ship
- Endurance estimation
- using ccpm mix on tail rudder surface on airplane?
- Those bird wings
- Standard tail feather to-----> T tail
- Inverted Flight with Undercamber Airfoil?
- Are all your airfoils obsolete?
- I need an Electronics Wizard to help design this black box
- Largest flat-plate wing?
- Cranked Delta Flat Plate Aerofoil
- Isn't There A Name For This?
- Low aspect ratio wings
- how much throw for all-flying stab?
- Pylon racer dihedral
- How to build scratch planes.
- Too hard to attempt?
- everything but a plane!!!!!
- What does "energy retention" *really* mean?
- Need help with thrust line!
- Brakes for hard runways
- Building a wind tunnel
- reduce servo load
- Electric ducted fan to boost diesel turbo
- Pet project:How do i modify my 4 in 1 receiver? or do i need to?
- Lengthen the nose?
- Effect of landing gear on pitch stability
- Using 7035-7036-7037 aerfoils in root to tip transistion accross wing of sailplane?
- Weight/thrust/wing area-shape formula
- Any way to get a 15:1 glide ratio out of a 12" span glider?
- Alpha angle and flaps
- acro.wot nose drop
- Parkzone Typhoon Sport Wing?
- Sources for design rules of thumb.
- Look for free template printing software
- Adverse yaw and aileron differential
- Wing slats for STOL
- Why is rib stitching done?
- Birds Have Curved Trailing Edges, Why not planes?
- Motor orientation
- Need Loads of help
- Anyone have the correct zero lift angle for sa7035/36/38?
- faster than wind with prop geared to drivetrain?
- Swept wing C/G
- wing/tail incidence & design decisions
- anyone experienced with avl or tornado?
- Swept wing washout?
- Ch and Cv formula
- How big to make side force generators
- MH45 wing section info....
- Need to design a prop - For clockwise, and anti-clockwise operation
- Designing planes using Simulators
- Career choice info.... Aeronautical Engineer
- lifting stabilizers?
- Washout on a Wing, especially a Polyhedral
- Cessna 182 scratch-build design... pointers?
- Superconductors in Brushless motors
- Tip-stall and turbulators
- Is dihedral on a delta wing bad?
- When thrust is large what is best angle of climb?
- Advice on wing incidence
- wing loading-full size compared to models
- Engine offset in ben buckle super 60 trainer
- Full Scale Mockup
- How do you calculate motor estimates manually?
- Engine offset and 3D flying
- Generalised VTOL formula
- MAC Challenge!!