- Help with weight and control surface choice for a converted free-flight glider
- What is the best split elevator setup?
- CG for flat wing
- multiple ESC'S
- CG at 21%?
- Source for RC airfoils ?
- thrust maps for common propellers?
- inline jet engines?
- Up thrust on Seaplane?
- Cooling opening size?
- b-2 wing prob
- Bell Shaped Lift Distribution
- C of G on compound flying wing
- Aerodynamics and the crash of the B-52
- Software for calculating speed by doppler effect.
- stab has a 1-2% tilt relative to the wing---what effect?
- Down or Side thrust for Pusher prop?
- Flaps / Spoilers and elevator compensation
- Flight loads
- Basic Formulas
- air pressure behind spinner?
- Operation Sailfish and more weird science
- Spoilerons
- Physics Genius Please!!!
- Using Profili for Airfoils??
- Aerotow tow hook position?
- General Airfoil Question Re: Glider
- Servo throttle/butterfly valve
- Explain yaw-roll coupling...
- estimating power needed for level flight
- Tell me what makes it fly
- Active drag control
- Carbon fiber rods vs.carbon fiber tubes.
- Airfoil recommendation
- Aerofoils -
- Somebody needs to make a spreadsheet..
- Great plane, poor glide, scale Bleriot xii
- Flat airfoils: slow vs. high speed, small vs. large
- What causes the bumps in E387 polar diagram
- Need Help, CG and Incidence Angle
- Reynolds number ???
- Static Thrust vs Actual Thrust
- Airfoil for Scale WW2 Fighter?
- Optimizing Constant Chord Wings for Speed
- deriving prop equations from scratch
- Software wanted
- aerocomp
- Rudder yaws plane correctly but then drops oposite wing?
- 1/8" Thick Trailing Edge on Swept Wing Foamy
- Camber
- Foil Design for Big Park Flyer
- Drela DAE 51, doubts.
- UAV Design Challenge - A suggested read
- twin,thrust offset?
- help with Scaling from original plans !
- Where does a plane rotate - laterally ?
- Downthrust/rightthrust revisited.
- How do you calculate the drag of a simple object
- Low Wing To High Wing
- trying to understand winglets
- Brushless Kv?
- Adding nose weight for penetration
- Crow or Flaps for Landings?
- epp foam & CA glue
- How to design your own model?
- Twin Tails and Approximating Tail Volume
- Delta Cad files to DXF files ??
- EPP Foam Properties
- Need a second look at a C of G
- Pitch sensitivity
- Could a leg lift a cowl ?
- How much mixing to use......if any?
- Does anyone know how to balanceand fing the C of G on a rocket?
- Coolest Gizo-Gadget I have ever seen!
- Informative Sites