- Going cordless
- Center of Gravity
- Home Built Trainer for Scouts
- Tips for working with CA glue
- Kinko's Scan and Print service
- How to Hinge Ailerons with ends too large to taper?
- Os 46
- Any one heard of a profile Doghouse?
- brazing or welding
- Soldering Bullet connectors
- Happiness...
- How to actuate a split flap?
- Attn: AutoCAD gurus! please help!
- xacto blades and wood cutting...
- free plans
- Cutting slots in wings for fitting stiffner rod
- what tools do you guys use to cut balsa or plywood ??
- Airliner
- sailpane caddy ideas
- airbrush propellant
- What to use to check for wing warps
- 1st time Balsa Build.
- wanted : old global skylane plans
- Bench Tools Which to buy first?
- DAVE Brown Wheels, a quick Q
- engine mounting
- What glue to use?
- Heat shrink stuff
- R/C Flying Bicycle Project, Help Needed
- CG for FOUR STAR 60 ???
- Pull-Pull Rudder Linkage Question? 80" Cap 232
- A Flying Snoopy Doghouse
- Alternative to CA for plastic-to-wood
- Freetime
- Impact of a not quite horizontal stabiliser on an SA Cap 232?
- Multicolor covering technique?
- Glueing hinges
- Carbon Tube vs. Carbon Rod
- Which Minwax product?
- Does this plane look overbuilt? Some dumb plane-from-plans ?'s
- Skinning with Aluminum
- need help with a few questions on building with foam
- Building with foam??
- Would this vacuum pump do the job?
- Is it possible to put to many amps through my wireless video rx?
- Airbrush tips
- Some Newbie building questions - TMPro Katana EP assembly
- Where to mount servos?
- How to glass a balsa sheeted foam wing?
- What kinds of glue do you builders use?
- wing flutter
- What kind of glue can be hotwired?
- Watts up and Prop Balancers
- Airframe covering advice
- CAD files of commonly used parts
- Tape residue removal
- Autocad "Boundary" command
- paintable covering question
- Best way to install wheel pants
- What glue to use
- Foam Cutting method
- Carbon Wet Noodle
- Best way to make a cowl?
- Aluminum tube wing jointer kits?
- Reading plans....
- Looking for a CNC router again!
- Punch/Drill holes in sheet brass?
- Wingspan issue - do I shorten or leave long?
- Curious about what type of machine I would need
- Airbrushing a model, HELP pease
- Laser Cut, Mill, Lathe Parts
- Free CADCAM modelling program
- Building a simple CNC foam cutter.
- Aluminum planes
- What sort of Dope do I have ?