- 400 Amps From SCR's and 500 size motors !!!!
- Mega Motor Help
- What about all these hot little car motors?
- Astro flight motor trouble
- AP 29 Motor Calc help pls!
- Power for FVK Silent Dream
- Wattage Piper Cub - what setup?
- XE2 motor suggestions please
- GWS ISC-100 vs. 9.6v
- CC Phoenix 25 with BEC on 4 E-Tec 1200?
- Twin AF010 setup
- wiring Razor and Phoenix together
- Speed 400 Timed / Life ?
- GWS P51 on 2S Etecs 1200. Any good ?
- I need a heat sink for my pheonix 25
- Long can 400 same as a speed 480?
- Outrunners on wings
- help break in gws300
- Anyone familiar with this motor?
- B40 8s + 4.4:1?
- Razor 400 Max Amps
- Promax 300 Gear Motor -anyone use this gearbox?
- AP-29L gearbox applications?
- Brushless direct drive advice sought
- 8 hour's of running-in time??
- Warbird on 3xE-tech 1200s - Motor ideas?
- Motor life expectancy.
- What's wrong with brushless ESC's?
- How many amps can a kontronik 480-33 take?
- two brushless motors on one speed controller?
- APC E and SF Props
- small 280 to 300 motor upgrade
- IPS-D Gearbox case?
- MPJET brushless motors in Europe
- I think my motor is melting
- Where do I get GWS Gearboxes?
- Gearbox options for Astro 020 BL sensored ?
- Etec 3s1p 1200 too little for Astro 020 APC 7X4
- Hacker C40 Motors in MotoCalc
- Kontronik back plate removal
- What Prop Size for geared Jamara 280 motor?
- Motor water breakin with esc
- astro 010 w/gws gearbox?
- Razor 400, RPM's and Me109
- Jeti 45-3 Motor Repair -- Help!
- Help : Speed Controller
- What motor would work ?
- Question on installing heatsink to a speed controller
- throttle settings for brushless, help
- Global Super Cobalt 400 27T quick question
- Razor 400
- Hacker C50-1?L & You
- AF010 gear reduction for a TINY
- Endoplasma gearbox suggestions please.
- Are the power curves of all brushed motors the same?
- Lipos and Motocalc
- Help with Motocalc Vs. the real world.
- kONTRONIK SUN 3000 SPD CTRL
- How hot is TOO hot?
- Jeti 30/3 Setup
- Is my RZ2500 Damaged?
- Mabuchi Motors and Motocalc
- Would like some opinions on switching motors on my PF-6 and Pleaser 400 Planes
- battery for AF FAI 15?
- PJS for IFO, 8043, ET700 & mounting
- bl motor for 2 cell lithium
- Possible hacker GB problem
- Should you pay more for Hacker??
- Mega 16/15/7 on 2 cell 1200 E-Tec?
- Predicting motor efficiency
- Ds-40 wont initialize...I and Aveox are baffled...!?
- pj300
- pinion attachment?
- Razor 400
- Brushless to controller Connection