- MiniAC1215/16 & Phoenix25 problem
- Razor Micro Heli Motor
- "inexpensive" brushless set-ups?
- Motor/ESC Q
- New Cosmotech GB - Lube and do I need to break it in.
- Shunt anyone?
- Motor Shaft Sizes?!?!?!?
- Motor & Prop selection
- Best S400 Gearbox ?
- Help with new power set up please!
- Can someone please do a quick motocalc power check?
- How many have had problems with Phoenix 25 controllers?
- Rev or NORM required for Pheonix 35
- R/C TYCO toy car motor to plane conversion?
- Hacker B40 7S+4.4:1
- Recommendations for a sp600 8,4v
- amps or watts - which burns up drive train more?
- 12.5X6 Folding Props. Where do you get them
- How to identify an electric motor?
- Mega 16/15/4 W/ 2.5:1 and 10-8 prop on a Wattage Extra 330L
- Does A Brushless need Capacitors?
- GWS EPS 400C for Slowstick: What gear?
- Confused:Speed400 vs. MPi EPU4
- who has the new Astro 010 gearbox in stock?
- APC prop fits GWS GearBox?
- E flight pusher props?
- (Twin EDF) 1 or 2 speed controllers needed?
- Remounting motor in GWS300 Box
- Motor terminal identification
- 3-pin connector for AF010
- non-rewound CD-ROM motors -- shorted?
- Surplus R/C car stuff = useful e-flight power?
- Hacker B50-10L geared ???
- kontronic fun 400-23, gear box?
- Replacement GWS Gearboxes - Who's got them?
- Mega 22/30/2 in Midifans for Matt Halton F-14
- MP Jet pinion glue drying time?
- mega brushless with gearbox mounting
- MINI AC1215: 5-6 Cells?
- Update on Castle Creation Controller Problem
- Motor upgrade for a Zagi 400x
- AF010 and 6x6 prop
- Goldstecker Connectors
- I Need a Lesson in Brushless Motors Please!
- Astro brushless geared 020 motor limits?
- Conversion from 2-blade to 3-blade prop
- What prop adapter or spinner ?
- Razor Vs. Astro 010
- Goldstecker Connectors
- Better ways to bond pinion to motor shaft?
- gws esc on 3 lipo cells?
- When is a 400/480 motor "shot"?
- If you had a Mega 16/15/2 handy, what would you do with it?
- WOT on Brushless????
- Astro 801H motor - what is it good for?
- Need help to find a motor
- Need help with motor KV AND its relation to motor windings
- # of cells for brushless question
- New AXi Motors?
- Graupner Speed 400 variants, Max watts?
- Kudos to Aveox support
- What to build ?
- B50 FAI gearbox problem
- Which wire to which motor pin?
- attaching spinner to Hacker B50...
- Hacker C40 in E3d question
- Actro 60/Flyware T-Rex
- Differences in wire – Rookie Question
- any other comparable to turbo 450?
- signs of a weak turbo 450-Andy?
- The Big AXI Motors are here!
- What's up with the VMGM 4,64:1 GB?
- Oiling motor bushing?
- Kontronik Customer Service
- multi help