- LEHNER brushless motors
- MaxCim and Hacker controller possible?
- GWS Nacelle Kit - EDF-50 fan
- hacker b20-22s + 4:1 g/box
- Speed 400 break in and mounting questions
- broken wires on astroflight 010
- Titanic airlines GD 280
- Sportsman Aviation ME-109 from HP
- Gear Ratio Question.3.5:1 to 3.8:1?
- QRP Hyper 400 numbers??
- AXI 2820/10, Jeti opto esc.
- 15 amps through a deans 3 pin?
- Astro 25 straight-cut gears?
- GWS ESC's cell-count; BEC or FET issue?
- Hacker B20 15L getting HOT with my lipoly's.
- Power Suggestions for 39" Spitfire
- orion to gws gear drive?
- How brushless looks inside
- bRUSHLESS TMM 18-3 CONTROLLER
- Aveox 1005/4y gearbox???
- Better alternatives to a S400 needed please
- Ultimate BEC,Does it Work??
- Mini AC 1215 and GWS gearbox...
- Motor Calc Idle currents
- mega 15/16 motor fixing to pusher F-15?
- Watt meter, could this do!!!!!!
- Measuring brushless amp draw
- Pheonix 10 question
- Can anyone help with MP jet motor calcs?
- 110 Deluxe
- Thrust/Prop/Revs calculator
- Mega 16/15/3 Y So HOT!? w/o prop?
- Astro 010 replacement?
- Mini AC 1215/16 and GWS 300D Gearbox for a Miniflash?
- spur gear weight affecting motor rpm?
- GIF Image of Astro 3.1:1 Superbox
- APC Prop Question
- BL PJS300SF and IPS-A
- Hacker B40-7L Do I feel cogging?
- Problems with Orion and 3 Li-Poly cells
- Mounting Ideas for Astro#801P(new axial 4:1 GB)
- Razor RZ-350 motor on a GWS EPS-300C GB?
- Anyone taken apart an Egull/Cub 180 motor?
- Grrrr... Mini AC 1215/16.. Phoenix 25 soldering Help needed
- Me262 by S&B Models (HELP)
- Astro 010 Owners, Read This.
- Polish those Astroflight motors!
- Interference with brushless system please help...
- Dual motor ISP question
- Magnetic Mayhem on 10 cells?
- ESC - Does size really matter?
- Astroflight Whatt meter with Deans connectors.
- APC Thin Electric Prop Hole Size
- Ed Lyerly
- Power System Data from MWE planes
- Connector between ESC & Motor
- newbie needs help w/ JKA p51 pwr recomendations
- Astro 5-turn 020 at 23 amps....
- New Mega Brushless Motors
- Thrust to weight ratios?
- Mini AC 1215/16 General questions.
- MEC Solderless Power Tubes
- 1001 and one things to do with those old s400 can motors...
- Split 280 power system question
- GWS IPS Help...
- Third-generation Wattage Cobalt 400
- Brushless upkeep?
- Worth "breaking in" IPS motors?
- AXI 2820/10 or...
- Hot liner weight
- brushless virgin
- Replacing an Astro gearbox bearing. How?
- Multi motor edf-50 set up w/ gws ESC
- Best replacement motor for GWS Cub
- Where to get GWS eps gearbox?