- Low pitch propellers as a replacement for gear drives?
- Capacitors
- Help w/ motor/gearbox selection
- Is this Speed control big enough?
- Power System Problems
- Battery question
- fried my Jeti 30 esc, can i fix it?
- Limits of charging from cigarette lighter?
- How to get CG for a delta wing? (Mirage)
- Increase incidence at wing or tail?
- What causes radio interfearance
- TurboCad2D
- Thrust vs watts
- Carbon Fiber Rods for Wing Spars
- Help! Male or Female??
- Speed 400 on 12 cells, am I mad??
- Servos working, but not ESC
- When not to use nickel metal hydride
- CnC - Micro Mill
- Servo information needed...?
- Li-ion 5000 mah
- flying wing airfoils continued: Sipkill airfoil?
- Orbit, Shulze, or Ginzel?
- Battery pack building questions...
- Graupner Gearbox on Astroflight?
- approximate current
- More electrical confusion
- Permax 480 timing?
- Standford U -Anti Jammng R/C?
- Speed 480 Duration-help !
- Geared 6v400 on 10 cells?
- Seperating end to end soldered cells
- Laser gyro?
- 7x3 prop on direct drive 400 ferrite motor?
- 12-20amp lithium cells available.
- JETI Brushless Problem
- What is the upper voltage and amperage limit for the AF brushless 05?
- Wipa Speedy Turn Tendency?
- Carbon Fiber
- Free CAD Program?
- 1010 2y max amps
- Computer Interface for FMS/Cockpit Masters
- Care and feeding of acro 280BBs
- Modifying a JR642 Transmitter
- Foam Wing Climbs After Turn Out
- Material Weights
- AP36 Direct Drive??
- Servo reversing via re-wiring?
- Great planes electrifly C-30 amp. limit?
- 6x1600 peaks @ 1700, 8x1600 peaks @ 1550 ?
- Dymond super smart charger, anyone have one?
- different capacity cells in pack
- Are there any online <b>Strobe Light</b> circuits?
- Are there any online Strobe Light circuits?
- batteries peak too fast???
- Gearbox for Aveox
- Anyone flying with 4000mA NiMh Sanyo HR4/3AUs ?
- Gearbox links and manufacturers?
- A question about coreless vs. brusless motors
- 2 blades vs. 3 or 4 bladed props
- Reverse polarity on a Duracell AA?
- Promax Motors
- the "inside of a motor".
- Question about interface cord for FMS and hitec eclipse 7 w/ spectra
- Help! Component ID...
- How does motor timing actually work?
- Speed 280 maintance question
- vacuum bagging
- oddball cg calculation
- Jeti 40-3P BEC Controller, 10 cells, 4 servos?
- yet another motor source?
- Flying Motocalc-what is a reasonable top speed?
- Flying Motocalc-what is a reasonable top speed?
- Brushless Curing? Sensorless startup observations?
- Where can I get Sanyo RC-2000 cells???