- Question about capacity under load
- Expected Lifetime for Batteries?
- what charger to buy?
- Irate 850 applications
- GWS A-10 with E Tec 1200 2SP1
- What causes ETECS to lose Power after a short period of time?
- HE cell pack upgrade
- li-poly charging and discharging
- kinda dumb lipo question
- Lithium charger question
- How stupid am I?....read on!
- how many amps can gp 2100 nimh supply?
- Battery resoldering?
- iRate 850's, 1100's, 500's are here
- need help with DIY lithium charger
- need help using my voltmeter
- 3 cell kokam li-poly pack
- Who has AF 109 in stock...really?
- Need a good charger..
- 2 Cell Lithium @9.6v?
- Rogue HE Cell ?
- Charging a half-used LiPo?
- 12V power supply
- TANIC 1800mah DIscharge graps
- Westecnik li-po charger. 24V?
- Help badly needed
- Aluminium solder in the UK?
- Plug for Kan 1050
- Where to get a kokam charger and safety device?
- LiPo's combination for Sp400 and Sp600
- LiPo's in parallel
- Help! Need TX battery for Hitec Focus 3
- The right lipos for rz2500 and rz300 max power?
- chargers
- Li-Poly in UK- Single Cells Vs Pre-made packs
- Lithium Powered Power Tools -
- TP 5s3p config, whats it good to?
- Identical Packs - different behaviors
- E-Tec 1200 imbalance
- Thunder power or tanic for Uk when ?
- lipo's and having to soder with aluminum?
- New LiPoly rule of thumb?
- LiPo for Wingo?
- ST Model KA-V1000R lipo charger
- Apache 1500 left on overnight????
- Anyone used these packs from Balsapr.com?
- Brand new Kan 1050 NiMH
- Astroflight/Schulze capacity?
- Aluminum Solder Warning
- Safe to use Lipos with no LVC?
- What are the Signs of a Bad Lithium Charger?
- Great Deal on Kokam 3S packs!
- Is there a cheap and easy lithium poly safety circuit?
- An Apology
- Li-Poly convert!!
- Swollen but cold LiPo Cells
- ?? Badly Dented LiPoly Pack
- EPS motors
- Best battery connectors for me
- LiPo's capacity vs. voltage
- Corona battery special
- Would this be good for a power supply?
- Li-Poly Capacity
- GWS MC 2002 battery charger
- Power Supply
- Good Charger
- What is next? Why is everyone dumping their Etecs?
- LiPo balancing
- Aluminum Tab and General Soldering Techniques
- Cosel power supply question
- interessting read
- Homade Eveready NimH packs, any downsides?
- Help...will It Be Survived?
- Cheap Batteries???
- GWS 350-C and Etecs???