- don't hook nova charger to esc''
- Can I use Kokams w/GWS 100 ESC?
- charge amperage question???
- NiCAD or NiMAH?
- Supernova- Down or Up?
- Kokam Amp ratings
- False peak on Dymond Super Turbo
- 5/4AAA's on the cheap?
- Questions about batteries, Volts and mAh...
- Problem with my 8 cell HR-4/5AUP pack
- C/10 Charger - Help Needed
- HE1100? How much weighs?
- Why 15a Speed C for 8.4/600?
- Charging sealed lead acid batteries..
- is my charge/discharge cycle killing packs - how do you look after yours ?
- What is Reflex Charging
- 7 or 8 Cell CP1300SCR's?
- Why 15a Speed C for 8.4/600?
- MAXX 1000 cels - Maximum amps?
- My Dymond Turbo Charge Smoked (Carnage)
- end to end battery pack jig photos
- dymond super smart charger?
- best prices for packs...
- minh 380
- 1100AAU cells, how much can they take?
- Old Cable Modem Power Supply -- useful?
- Good NiMH battery prices.
- source for 7-12 AH gell cells IN L.A.
- Are RC-2/3SC the same as CP1300SCR?
- Fuel Cells
- How far do you get the first charge go?
- MRC 959 Superbrain question
- 3000HV Fast charge?!
- Best Charger for E-Heli Flyin?
- NTera develops 20C lithium batteries
- Power supply for LiPoly Quick Charger ?
- Good 1300mAh sub C required
- Has anyone tried this Li-Ion charger IC?
- Measuring internal resistance?
- ISL-330-d question
- Recurring Charge - October 2002
- charging and discharging?
- Anyone using the LiPoly batteries
- What do you guys think of the OMNI charger?
- Where to find solder tabs?
- AC adapter as a battery charger
- BEC help Please!!!
- Batteries, wires and connectors...Which ones should I use.
- Try or Buy??
- Kokam 1575?
- 7.2V 900MAH NIMH pack from Hobby Zone
- Number of cycles on a nicad pack?
- .
- My 8 Cell 800mAh Fried!! WHY?
- Battery duration calculater
- Battery Recomendations for GWS Pico Stick- S
- GWS Beaver Batteries
- twin motors:twin Battery Packs?
- Hecel purple batteries
- 2/3 A sized Ni MH cells
- RC2400 & Cp 2400 Compatility
- Micro Fuel Cells
- Fixing damaged pack. I need help
- first time charge rates
- New Charger Question
- HECELL Li Polymer
- cp 2400 idenity?
- Schulze 636+ and Kokams?
- Beginning charge on new packs
- Soldering loose cells?
- I need a 2nd charger
- Kokam 1020, Can you repair Positive tab?
- Battery quality
- 2070 mah kokam.. max amp draw?
- power supply recommendations... HELP