- Which Li-Poly?
- Li-Ion Charge Rate?
- KAN950's-What's the "KAN" stand for?
- Kan 950 cells how they are better than the HECELL in REAL SIMPLE Laymens terms.
- NiMH capacity going backwards?
- Min. Discharge Per cell?
- HR-4/5AA 1350mA NiMh questions?
- How fast can I charge those?
- Strange Charger Question
- Anyone have Orbit 6.2 upgrade binary?
- Kokams with PCB
- KAN's found elsewhere?
- Problem charging 3s LiPo with Triton
- Another case of premature HECell death
- Peak Charger not stopping?
- Best charge rate for KAN 950 NiMh ?
- 1700 AUP nimh charging
- PC Power supply
- What are the best high current connectors ( Corona ) to get?
- Orbit V6 Price Increases
- How to place a order with byd batterys
- Faster way to charge batteries
- Recommend easy peak charger
- li-poly pack failure
- Surplus Lithium Low Voltage Concern
- charger
- Did I mess up?
- HECELLS with Brain 959 charger
- Lithium Ion Batteries
- What kind of batteries are these?
- li-poly charging
- Storing Ni-Cads
- Problems Charging the 12v w/Triton
- Dynamite Mega 2 Quick charger for airplane batteries?
- What charger for a 7 cell Sanyo 2600 pack?
- li-poly, should i chrge cells prior to pack building
- VERY DIFFICULT to solder to ETEC 700 tabs!
- 4/5AUP or 4/5FAUP: who has 'em in stock??
- Help choosing a battery pack!
- KAN Cells and MotorCalc
- Using tx charger to slow charge packs?
- I got my Kokams back
- Cool-off Temperature
- hecell 1400mah Li-Poly any one try them
- Making chargers safer: temperature sensors?
- Balsa Products' 7x600mah Nimh?
- 800 nimh--how many amps?
- E-Tec web site?
- When will LiPoly packs be available?
- My First Hydride Packs
- Any good 6-14 Cell NiMh 110/12V Charger?
- Charging new 2400's
- Dean's Ultra pigtail male?
- GWS gave great service on my charger.
- A 2050mAh 7,2V with a voltage of 43,61...WEIRD?
- JR 8310 and delta-peak charger?
- On the horizon.............
- Any one using the 4/5 AUP 1950 nimh cells for F5F/F5B type currents?
- Store HE cells and Kans cells
- PC power supply modifications??
- Problem Charging Kokams with Triton Charger
- Balancing a pack
- Nimh charging question
- Sealed Lead Acid Questions
- 1400ae in brushless set up?
- Triton setup for Lipo
- ETech !1200 and GWS P51
- Help Building a 3 cell 560 Kokam with PCB's
- Cheap Radio Shack Chargers and L-I's
- ETech or Kokam for my Beaver?
- charging NiMH
- Looking for new NiCad & NiMH battery Charger. Which one the best ?
- naked cell short out?
- Schulze isl8 won't work with power supply
- KAN 950 question