| Wanted |
|
Posted by: antoinevan / Huntington Beach, CA
If you have a Miss Geico or Mystique 29" that you are not using, please let me know. It doesn't have to be in perfect condition as long as it doesn't leak that would be fine. Thanks.
PS: I know...
|
Unknown |
|
0 |
63 |
| Wanted |
|
Posted by: flynow1
I need a 2.4 GHz 2/3or 4 channel radio for sailboat. Flysky or equal.
Thx
|
Unknown |
|
1 |
112 |
| Sold |
|
Posted by: birdy233 / Dallas
Partially assembled Dumas Barrel Back kit #1241. This is the big one. Everything is there, no time to finish right now.
$125 shipped
|
Unknown |
|
2 |
232 |
| For Sale |
|
Posted by: Jcopter / United States, CA, Downey
2 Sling Shot Racers
I have 2 complete sling shot racers on 2 separate channels
so you can race. they are complete with 2 sets of batterys
I am lookin to get 70.00 shipped
thanks for looking...
|
Unknown |
|
1 |
137 |
| Sold |
|
Posted by: Jcopter / United States, CA, Downey
For sale Traxxas spartan with XK4074 brushless motor, HKB200A ESC , 2 Sky Lipo 4 cell 5000KV lipos with 2 sets of trim tabs, extra prop drive cable and streemlined drive dog as well as extra drive...
|
Unknown |
|
1 |
238 |
| Sold |
|
Posted by: norgale  / Bonita Springs,Fl.
This kit $12 plus postage. Pete
|
Unknown |
|
1 |
205 |
| For Sale |
|
Posted by: norgale  / Bonita Springs,Fl.
This kit $10 plus postage. Pete
|
Unknown |
|
2 |
170 |
| Sold |
|
Posted by: norgale  / Bonita Springs,Fl.
This kit $10 plus postage. Pete
|
Unknown |
|
1 |
131 |
| For Sale |
|
Posted by: norgale  / Bonita Springs,Fl.
This kit $15 each plus postage. Made for the Dumas Pay N Pak kit.. Sorry no PayPal. Your check or a MO only.Pete
|
Unknown |
|
0 |
170 |
| Sold |
|
Posted by: norgale  / Bonita Springs,Fl.
These kits were made by Dumas for specific boat models but not all of these boxes are marked anymore. Parts can be used for any boat as required.
This kit is $15 plus postage. Pete
|
Unknown |
|
2 |
181 |
| Sold |
|
Posted by: norgale  / Bonita Springs,Fl.
Assorted Dumas running gear. Shafts and stuffing boxes with oilite bearings.
$25 plus postage. Pete
|
Unknown |
|
8 |
233 |
| Wanted |
|
Posted by: GFONG
would any one have a copy of the older dumas cobra kit with the built up fin?
Thanks Garey
|
Unknown |
May 08, 2013 09:57 AM
by GFONG
|
0 |
72 |
| For Sale |
|
Posted by: matt99 / United States, KY, Henderson
The boat is 36 inches long, it has a Dumas 12 volt speed controller, 2 dumas motors side by side with gear reduction, and a wood planked hull. I am not willing to ship it , so it would have to be...
|
Unknown |
|
1 |
359 |
| Sold |
|
Posted by: sundogz
RTR H&M micro Drifter that has all the goodies, but has never been in the water. The ponds around here are too small, and the lakes too big and choppy. I'm told it should easily top 50mph and...
|
Unknown |
|
0 |
176 |
| For Sale |
|
Posted by: pelerin
I am selling the following items for RC electric RC boats,they are absolutely new
1 – Two ( 02 ) chanels radio of hobbyengine without servos, never served 17 $ each.
2 – Two ( 02 ) ESC of...
|
Unknown |
|
2 |
271 |
| For Sale |
|
Posted by: stevster / United States, CA, Cypress
For sale:
A vintage boat motor drive system
Includes:
Motor, 1 into 4 gearbox, 4 shafts, 4 universals, & 4 props.
I ran the motor on 4.8 volts, and it ran smooth, but I don't know the...
|
Unknown |
|
0 |
254 |
| Sold |
|
Posted by: stevster / United States, CA, Cypress
Hey you R/C boaters that like to indulge in a cocktail or two!
This is just what your bar is missing.
It's a vintage, battery operated outboard motor, drink mixer.
I've had this for years...
|
Unknown |
|
4 |
388 |
| For Sale |
|
Posted by: WAYNE CANTIN / BOILING SPRINGS, SOUTH CAROLINA
SCALE MODEL LUMBER/STRIPS
YOU WILL RECEIVE 60 PIECES OF EITHER
GENUINE TEAK - BASSWOOD - MAHOGANY -
MAPLE - BLACK WALNUT - CHERRY -
ZEBRA WOOD - BLOOD WOOD -
|
Unknown |
|
0 |
214 |
| For Sale |
|
Posted by: allterrainrc
This is a 33" intruder s made by hydro&marine in Germany. 289.00
Fine design hardware fully polished. 120.00
It has a 1521 1y steve neu motor with water jacket 280.00
with a seaking 180 speed...
|
Unknown |
|
0 |
331 |
| Sold |
|
Posted by: jbj620  / United States, AL, Fort Payne
1 - NIP Spektrum MR200 2 channel Marine sport receiver - 35.00 shipped. SOLD
http://www.horizonhobby.com/webapp/wcs/stores/servlet/SearchCmd?searchKeyword=mr200&searchType=productgrid
...
|
Unknown |
May 06, 2013 06:55 AM
by jbj620
|
4 |
138 |
| Wanted |
|
Posted by: us22496
I'm looking for the grease fitting for a Graupner Hydrospeed 500. It's the little black piece that clamps around the shaft tube. I have one, but I need two for my Portofino.
Thanks,
Eric
|
Unknown |
|
1 |
88 |
| Wanted |
|
Posted by: bryce120
I have a 1/8 scale U-10 Smokin Joe's Hydroplane that I need to find everything for. I need back wings, motor, propeller, gas tanks, remote, ect.. I just have the shell. Any info will be appreciated....
|
Unknown |
|
0 |
92 |
| For Sale |
|
Posted by: pelerin
I am selling the kit absolutely new of the Vladyka CARIBIC RC boat ,it has to be mounted.
I send everywhere(tne plus postage),paypal accepted.
|
Unknown |
|
1 |
355 |
| For Sale |
|
Posted by: Jetnfast / United States, MO, Warrensburg
Up for sale is a brand new FighterCat Racing V-Mount Rudder with Water Pickup.Never been installed, I am going with a single offset setup instead.
Perfect upgrade for an EKOS (bolts to stock...
|
Unknown |
|
2 |
143 |
| Sold |
|
Posted by: Jetnfast / United States, MO, Warrensburg
Up for sale is a new in the box TRAXXAS SPARTAN CASTLE CREATIONS MARINE WATERPROOF BRUSHLESS ESC VXL-6S 3385X. I removed it from the packaging only to take pictures. I received this as a new...
|
Unknown |
|
1 |
198 |
| Sold |
|
Posted by: HYDROJERRY / Louisburg,North Carolina
Proboat 1500 motor in excilent shape 45.00 shipped in the US,,, also for sale on ose forums so don't wait or it will be sold before you get a chance,, PM me if interested cuz im not on here much...
|
Unknown |
|
0 |
115 |
| For Sale |
|
Posted by: keok / United States, OK, Oklahoma City
The Soling 1 Meter kit is a scale version of the famous Soling racing yacht.The American Model Yachting Association has designated this model kit as a "One Design Class" radio controlled racing...
|
Unknown |
May 05, 2013 08:42 AM
by keok
|
1 |
396 |
| Sold |
|
Posted by: RcCrawler82 / United States, CA, Glendale
You are looking at a Pro Boat MG 29' that has the stock motor and esc, it has upgraded octura flex shaft and octura x642 sharp/balanced prop. The boat comes Rx-R. You will also need to solder new...
|
Unknown |
|
2 |
279 |
| Off Site |
|
Posted by: HydroPilot / United States, ID, Idaho Falls
I am posting this Hydro and do not want to sell it at all. But my wife is in trouble health wise, and I need to come up with some cash to help take care of the issue. I have tried to get financial...
|
Unknown |
|
5 |
329 |
| Wanted |
|
Posted by: SloHD / United States, FL, Pinellas Park
Just like title says. I'm looking for a 1/12 brushless miss elam. It can be just the hull or rtr. I am paypal ready for a hull in decent condition. Please let me know if you're looking to get rid of...
|
Unknown |
May 05, 2013 04:37 PM
by SloHD
|
1 |
129 |
| For Sale |
|
Posted by: wlrottge / United States, TX, San Antonio
Nirvana that has had the hull faired, painted white and wet sanded smooth.
All standing and running rigging has been replaced with 50# test Spider Wire.
Machined aluminum boom vang fitting. ...
|
Unknown |
|
6 |
411 |
| Sold |
|
Posted by: HugoCraft / United States, KY, Louisville
I bought this boat only a few months ago in March right before Horizon discontinued it. It had 2 deans wired up but I reduced it to just one deans since I have both 2s and 4s lipos. I can run (2)...
|
Unknown |
|
5 |
304 |
| Sold |
|
Posted by: ocso295 / United States, MI, Livonia
Thinking of selling my big guy boat. Hate to but I'm liking fpv to much, I might trade for a QUADCOPTER,(hint) or plane with fpv or some fpv gear or cash or Paypal....
Has a zenoha motor that...
|
Unknown |
|
3 |
404 |
| For Sale |
|
Posted by: Band1
I scratched built this fishing boat a while back on my thread,
and i am now making it available if you want it.
It's 44" L and 14" beam , the hull is fiberglass and the rest is all styrene.
You...
|
Unknown |
May 03, 2013 11:16 AM
by Band1
|
0 |
448 |
| For Sale |
|
Posted by: PontiusPilate / USA, VA, Chantilly
Very new Impulse. Ran 6 times in Lake Champlain over vacation... too big and fast for the little ponds I have around here.
This includes:
- RTR Impulse (boat, tx, rx, stand) paid $349
-...
|
Unknown |
|
4 |
272 |
| For Sale |
|
Posted by: ir3 / United States, CA, West Hills
Up for sale is a Battery/Charger package including 2 Power Sonic 6V 12A SLA batteries, Part number PS-6100-F2 and 1 Genesis 12V 1.2A SLA, Part number NP1.2-12. These batteries were used in a Robbe...
|
Unknown |
May 02, 2013 03:44 PM
by ir3
|
0 |
167 |
| Wanted |
|
Posted by: tbone77
Like the title says, I'm looking for a Billing Smit Nederland tug.
Interested in any condition, let me know what you've got.
Thanks
|
Unknown |
|
1 |
110 |
| For Sale |
|
Posted by: tantrasway.com
We are on ebay since 2004 with feedback rating 100%. http://myworld.ebay.com/tantrasway
What you see here is the COMPLETE boat, NOT KIT.
It's a real wood, not resin or plastic, model boat. It's...
|
Unknown |
|
13 |
548 |
| Sold |
|
Posted by: HYDROJERRY / Louisburg,North Carolina
I have afew left over props I don't need, prices are shipped in the US!!
Octura:
X440 Sharpend Ballanced and only the backsides polished 25.00
X442 Sharpend,Ballanced,polished,, its perfect and...
|
Unknown |
|
4 |
232 |
| Wanted |
|
Posted by: csr101 / edmonds, wa.
Looking for a Octura x632.
|
Unknown |
May 01, 2013 03:34 PM
by csr101
|
0 |
68 |
| Sold |
|
Posted by: sleepwalker / United States, PA, Clearfield
Original plans for the Misuri one man German tugboat from Flying Models,26" long x 10 beam.Comes with printed build sheet and article. $10 + shipping
|
Unknown |
|
0 |
233 |
| Wanted |
|
Posted by: Jersey Crewmax / United States, NJ, Union
I'm looking for a Thunder Tiger Neptune SB1 project sub. Not looking to spend a lot as I plan on tearing into it.
Let me know what you have and how much you want.
|
Unknown |
May 06, 2013 07:24 PM
by Wheels
|
1 |
103 |
| For Sale |
|
Posted by: tantrasway.com
We are on ebay since 2004 with feedback rating 100%. http://myworld.ebay.com/tantrasway
What you see here is the COMPLETE boat, NOT KIT.
It's a real wood, not resin or plastic, model boat - scale...
|
Unknown |
|
6 |
327 |
| Sold |
|
Posted by: crashnburned / Wilson, NC
I have a newly built TVR1ABB steam engine that went together really well. It is a twin cylinder, 1/2" bore, 5/8" stroke, ball bearing reversing engine with marine flywheel, optional bolt kit and...
|
Unknown |
|
2 |
219 |
| For Sale |
|
Posted by: kingjames / United States, IL, Aurora
traxxas spartan like new drove 4 times comes with stock batt local pick aurora, il
|
Unknown |
May 08, 2013 07:07 AM
by c/f
|
1 |
130 |
| Sold |
|
Posted by: fnlrun / redding ca
A guy owed me money and I told him I'd take the boat. She is in good condition
$225 shipped??
|
Unknown |
|
1 |
275 |
| For Sale |
|
Posted by: artist2 / United States, IL, Chicago Ridge
Up for sale is a new never built vintage MRP Fast Electric Tunnel Hull. 1990 & 1991 APBA National Champion. Asking $300 plus shipping.
Thanks for looking!
|
Unknown |
|
1 |
206 |
| Sold |
|
Posted by: artist2 / United States, IL, Chicago Ridge
Up for sale is a Hammer nitro boat by AquaCraft. This boat is in good condition but does have a few scratches and the prop needs to be replaced. The motor has great compression. Asking $75...
|
Unknown |
|
3 |
175 |
| Sold |
|
Posted by: Robert Pulse / Davenport, Iowa
I have for sale today a like new futaba Skysport 6, 6 channel transmitter, reciever, and charger. Works great, Battery holds a charge, posting it here because it is 75 MHZ. Right hand vertical...
|
Unknown |
|
1 |
205 |
| Sold |
|
Posted by: arnie84
Aquacraft RIO 51z blue & white Zenoah g26 RTR! NEW!!!!
Price: $575 shipped! Cont. USA only!
|
Unknown |
|
8 |
302 |