Posted by: HoverDown3K / Rochester, New York

Kyosho RC Yacht Fortune 612 Ready Set America's Cup Radio Control Sailboat Free shipping on all my auctions, I am selling off some RC items to fund other projects. thanks ...

Today 05:15 PM
by HoverDown3K

Posted by: P31 / United States, WA, Spanaway

I have a Aquastar water cooled motor and ESC. This motor can be wired ether 730KV or 1280KV $ 165.00 shipped

Today 03:59 PM
by P31

Posted by: baumer65 / Canada, BC, Chilliwack

1-254 evo $250.00 plus shipping. 1- s520 version 2 $650.00 plus shipping. both are new ,

Today 10:51 AM
by baumer65

Posted by: baumer65 / Canada, BC, Chilliwack

more stuff to sell.26cc sikk motor ,yes it runs .also a spare lower unit not pictured,and everything else in picture $125.00 and buyer pays shipping.

Today 10:48 AM
by baumer65

Posted by: baumer65 / Canada, BC, Chilliwack

just some misc stuff, motor jug ,crank ,piston,flywheel pictured are for a rear exhaust rcmk.selling as a lot sale ,don't want to separate.$150.00 buyer pays shipping.

Today 10:44 AM
by baumer65

Posted by: baumer65 / Canada, BC, Chilliwack

american rc ,comet hull for sale. hull is 52",sold as pictured $75.00 for the boat.'buyer pays shipping.

Today 10:40 AM
by baumer65

Posted by: baumer65 / Canada, BC, Chilliwack

laser 40 for sale,$250.00 plus shipping.

Today 10:36 AM
by baumer65

Posted by: sleepwalker / United States, PA, Clearfield

Dumas 1/4 scale crackerbox boat with new hardware(rudder,strut blade and bracket,prop,and turn fin),new IV bag for fuel,radio box with linkages,new fuel lines with filter,side hull fueler,side hull...

Today 07:14 AM
by sleepwalker

Posted by: ktm500mx

Wanted Walicki Skalpel marblehead class boat let me know what you have around? thanks Mike :popcorn::popcorn::popcorn:

Yesterday 10:59 PM
by ktm500mx

Posted by: matt99 / United States, KY, Henderson

it has running lights,runs on 6 volts,and all dumas running gear. you will need to add your own radio.The boat is 26"long 10" beam, i think it is 1/12 scale. $500 Shipped

Today 02:20 PM
by dobydog6507

Posted by: MIKEYOUR / United States, CA, Laguna Niguel

comes with everything needed to go have some fun 275$ shipped

Yesterday 03:42 PM
by MIKEYOUR

Posted by: thehoker / Oshkosh WI. 54923

Hello, Today I am listing for sale, a very nice tunnel hull, hull for sale. I have too many projects and need to make some room,and raise some funds to pay the bills. Im not sure of the...

Today 01:00 PM
by thehoker

Posted by: Skipjack585

Specs: Lengh: approx. 19 in Beam: 4 1/8 inches with diving planes extended Height: 5 7/8 inches including periscopes on conning tower. Comes with the WTC mounting kit. The dive planes and...

Yesterday 07:53 PM
by telusboats

Posted by: rcrick10 / United States, CA, Madera

UP FOR SALE IS A HOBBICO 42" HUSTLER GAS BOAT. IT HAS A FIBERGLASS HULL, GAS ENGINE, AND FUTABA 2 CH RADIO COMPLETELY RTR ASKING 300.00 SHIPPED here is a video. note the video says 49" but it...

Yesterday 01:03 AM
by rcrick10

Posted by: Rc all day / United States, CA, Laguna Niguel

This is a boat i got from a friend never used it myself it has a SR3300T so its BND. also comes with the two batteries pictured. $100. shipped

May 19, 2013 06:37 PM
by Rc all day

Posted by: Rc all day / United States, CA, Laguna Niguel

I have a used Rc Boat works thunderbolt ready for hardware and 26cc, this sale is just the hull. $290.shipped

Today 12:27 PM
by SandyAlan

Posted by: dwmumford / Bountiful, Utah

This is an original Victor Model Products Victor Cup Series Stars & Stripes kit. Victor still sells this kit: http://www.victor-model.com/products/stars-and-stripes The kit being sold is from...

May 19, 2013 05:35 PM
by dwmumford

Posted by: sharivivera

2007 Maxum 2200 SR3 Open Bow Boat PRICE: $3500 Year: 2007 Make: Maxum Model: 2200 SR3 Open Bow Boat Mercruiser V8 103 Hours Fully Serviced Mileage: 0 Engine: Mercury Mercruiser 5.0L...

Yesterday 06:13 AM
by scale_only

Posted by: spud nut / Nampa, Idaho

This is a nice boat that I got in a trade and just lost interest. It is a 48" fiberglass hull deep vee. It has a 30cc water cooled gas motor. twin rudders and a 2.4 computer radio for fine tuning. I...

May 19, 2013 11:26 AM
by dmach181

Posted by: Jersey Crewmax / United States, NJ, Union

This listing is for a used Aquacraft 60 amp esc and 1800kv motor out of a Revolt. They both function properly but I do not know how many runs are on them. I'm not interested in splitting them up. ...

May 19, 2013 09:17 PM
by Jersey Crewmax

Posted by: pilot01 / United States, ID, Boise

This kit has never been opened. Still factory taped. $145.00 plus shipping. Paypal only. USA shipping only. If you are interested, please contact me via email at: sandswalker@yahoo.com

May 18, 2013 04:04 PM
by pilot01

Posted by: DeOrioTom / United States, FL, Daytona Beach

This is an open top fiberglass hull powered by a Nitro 7.5cc OS 46 Max water cooled nitro engine w/tuned pipe. Spektrum DX2E TX/RX. The hull is solid all the way around. Boat runs and handles...

May 18, 2013 12:23 PM
by DeOrioTom

Posted by: Building One / United States, MO, Union

Will trade for a normal sail servo, I have a glider launch system and brushed and brush less motors and esc's. Servos and stuff, thx. Or money.

May 17, 2013 01:11 PM
by Building One

Posted by: drh024 / United States, IL, Bradley

Here is a new graupner jet drive #2345 29mm outlet $50.00 shipped to lower 48 Motor has been sold

May 17, 2013 05:08 PM
by in-d-boat

Posted by: MIKEYOUR / United States, CA, Laguna Niguel

i have this motor it was used once and then i sold the boat without the motor runs perfect its just sitting around

May 17, 2013 01:00 AM
by MIKEYOUR

Posted by: HeavyCruser9 / Adelaide,Australia

G'day All, I have a pair of 5.9:1 geared Pittman 24v dc motors (mdoel no. GM9234C212-R32C1533) that I will not be using these are torquey units suitable for a Big twin prop tug or large merchant...

May 17, 2013 12:09 AM
by HeavyCruser9

Posted by: C-ME-FLY / Wilmington NC

INSANE MOBSTER G4 hull in perfect condition, no scratches or blemishes, with Insane hardware and turn fin..Zenoah CCRacing 29.5cc Monster motor. Motor also has also has Insane tuned pro pipe....

May 16, 2013 08:20 PM
by Monstermanhbf

Posted by: P31 / United States, WA, Spanaway

I have this 1/8 scale Miss Bardhal that I started last year, and I am never going to finish. Comes with all you see and I'll even throw in the Lipo's. Not sure if the Lipo's will do the job on that...

May 19, 2013 01:50 PM
by P31

Posted by: CPL.FUZZ

I'm looking for the instruction booklet and plans for Midwest's, the Trawler, kit # 954. Copies or originals. Thanks for any help.

May 16, 2013 02:20 PM
by CPL.FUZZ

Posted by: greywolfe57 / United States, FL, Lehigh Acres

I ask this question in the forums but thought I would provide link I don't want to start conversation here but wanted to try to get an answer too :).. ...

May 16, 2013 01:02 PM
by greywolfe57

Posted by: JGuilty13 / United States, MI, Royal Oak

I have a spare NQD jet drive system. This drive is brand new and has never been used. Also included in the sale is a brand new 2040 2100kv brushless inrunner (for 3s use) and a matching water cooled...

May 15, 2013 06:01 PM
by JGuilty13

Posted by: northernmike

These are Turnigy Marine (AKA HobbyWing) 35A marine ESCs (programmable FWD/REV or FWD only) that I modified for use in my Mini-Eco Expert boats. I made up a batch of them - so these are up for...

May 16, 2013 06:16 AM
by northernmike

Posted by: Airex / United States, FL, Orange City

Have 2 available, asking $80 for red one and $75 for yellow one. Both work great but the yellow one has some minor cracks on the inside, nothing major. The remote, esc/receiver, and battery are...

May 14, 2013 08:11 PM
by Airex

Posted by: Spartan329

I have an unfinished Model Airboat of my own design with brushless Motor, 60 amp brushless ESC, ESC Program Card, Steering Servo and 4S 14.8 volt Blue Lipo 5000 mah battery. $150.00 Shipped to...

May 14, 2013 06:44 PM
by Spartan329

Posted by: Heathmac88 / Canada, BC, Victoria

Hi everyone I have a beautiful Kyosho Fairwind III RC sailboat up for sale that will NOT disappoint!! It has an orange custom paint, gloss white deck and bottom. The skulls are just decals and...

May 14, 2013 06:01 PM
by Heathmac88

Posted by: dno264 / San Francisco, CA

Hi -- Any chance someone has a Mystic Models Yachts Shields One Design kit or boat they want to sell. Thanks David

May 14, 2013 05:36 PM
by dno264

Posted by: MIKEYOUR / United States, CA, Laguna Niguel

hello i got this boat from a bulk purchase and im selling it because i dont know much about it 60$ shipped Technical data: Length: approx. 840 mm Beam: approx. 210 mm Height: approx. 150...

May 14, 2013 01:49 PM
by MIKEYOUR

Posted by: DARRIN4800

I bought this here a few months ago, never ran it been on my shelf. Drag racing season is taking all my spare cash and I need A few parts so boat has to go. Comes with Leopard 3674 ,2200 KV motor,...

May 14, 2013 09:38 AM
by DARRIN4800

Posted by: sponginator / Australia, WA, Port Hedland

Brand new Vac-U-Boat Tug Jr kit, bought it 6 months ago with the intentions of getting into RC boats, i have been drawn back to aircraft and therefore i am selling this with all running gear...

May 18, 2013 12:10 PM
by sponginator

Posted by: arnie84

Atomik Barbwire wanted running or not or just hull & hardware perfect to play with at lake being self righting

May 14, 2013 08:22 AM
by arnie84

Posted by: TRICKY RC / United States, IN, Fort Wayne

OK guy's we are running out of time .... It is time to get signed up .... If you think you got a world beater > JUST BRING IT < THIS IS THE SIGHT OF THE 2007 & 2011 GAS...

May 13, 2013 10:37 PM
by TRICKY RC

Posted by: Dave8888 / United States, AZ, Seligman

New and Unused turn fin for a JAE .12 outrigger (2nd photo). Comes with screws and washers. It came with the JAE 12g2 sponson kit I ordered and I just don't need it. It is curved and sharpened. Here...

May 13, 2013 08:27 PM
by Dave8888

Posted by: northernmike

As described: http://toronto.kijiji.ca/c-buy-and-sell-hobbies-crafts-Radio-Controlled-Victoria-Racing-Sailboat-W0QQAdIdZ482462957

May 15, 2013 06:28 AM
by northernmike

Posted by: Stitch1615 / United States, FL, Dunedin

Saito Ceveria Tug Boat. Power is a Saito T-1 (OB-1) single cyl oscillating engine and boiler. The boiler is meths fired and the engine boiler package is complete including the oiler. There...

May 13, 2013 09:19 AM
by Stitch1615

Posted by: arnie84

Ok this was a friend of mine first boat. He drove it a few times then hit the dock at the lake in the shallow end not paying attention. The boat took on some water but did not sink as he hit dock...

May 13, 2013 10:22 AM
by arnie84

Posted by: P31 / United States, WA, Spanaway

I have a Chuck Steffan fiberglass 60 ft Chris Craft, with a full set of plans and templates, and Port's will throw in some Mahogany sheets $200.00 shipped Gary

May 14, 2013 09:06 AM
by P31

Posted by: Assasin 1 / United States, WA, Richland

I have for sale one New Proboat?Dynamite 6s/80 amp esc have soldered EC5 connectors on it already, programming card included also just not pictured, asking $110.00 shipped This is for the Proboat...

May 12, 2013 03:53 PM
by Assasin 1

Posted by: Assasin 1 / United States, WA, Richland

I have a brand new proboat/ dynamite 1800kv 6 pole motor part#DYNM3830 for the Blackjack29 may fit other boats asking $75.00 shipped paypal is superjet112x@aol.com

May 12, 2013 03:49 PM
by Assasin 1

Posted by: dayhoffchuck / United States, CT, Cheshire

I need to find Decals for my old Pay&pak HydroPlane.........here is the Decals I need,this is not my boat just a pic to show ya what I need Thanks Chuck

May 15, 2013 08:55 PM
by silent runner

Posted by: chum444 / United States, MA, Woods Hole

Said another way, what I really need is the complete power train. Doesn't have to be fancy, the tug will be run by my two young grandchildren. I am in the midst of re-making a rather poorly built...

May 12, 2013 04:51 PM
by chum444