| For Sale |
|
Posted by: stevster / United States, CA, Cypress
OK. The wife said......"it's me, or the balsa"! I can't find a wives listing thread here on RCG.....so I guess its the balsa!!!!
Really. I'm planning a move in a few years. And I look at my...
|
Unknown |
May 14, 2013 06:56 PM
by ae4sh 
|
9 |
405 |
| Off Site |
|
Posted by: kylejclaflin  / United States, AZ, Phoenix
It isn't much and my site designer backed out at the last minute so I had no choice but to throw one together today.
Many more items will be going up soon but I need to get some sleep im human too...
|
Unknown |
|
6 |
263 |
| Sold |
|
Posted by: taran_js / United States, MD, Elkridge
I have some components that are used in fuel-based RC airplanes. I am not sure what they are called or used for. I got them in a trade but have no use for them.
A 1 1/2" spinner (with 3/8" shaft...
|
Unknown |
|
0 |
55 |
| Sold |
|
Posted by: taran_js / United States, MD, Elkridge
I have six used rubber wheels for RC airplanes.
Four are 1 3/4" in diameter
One 1 1/4" in diameter
One 1 1/8" in diameter
Asking $8 shipped to CONUS.
|
Unknown |
|
0 |
54 |
| Sold |
|
Posted by: taran_js / United States, MD, Elkridge
Following are included for sale:
One FP-S2831 servo tray with on off switch
One FP-S2831 servo tray WITHOUT on off switch (New)
One FP-S2831 servo holder
Two trays with two servo slots each
...
|
Unknown |
|
0 |
58 |
| For Sale |
|
Posted by: be69ar / USA, CO, Colorado Springs
...just a shot in the dark, but I have 2 hard bound MAN magazines from 2005 and 06...I don't think I've ever cracked either of them open. Not sure if anyone would be interested, but I thought I'd...
|
Unknown |
May 13, 2013 09:10 PM
by be69ar
|
0 |
73 |
| For Sale |
|
Posted by: Aurora9
This is a 4 axis CNC motor package, and is perfect for up to medium grade CNC systems.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=130908358916&ssPageName=STRK:MESE:IT
|
Unknown |
|
0 |
106 |
| For Sale |
|
Posted by: makya / United States, TX, Nocona
I have 2 Hobbyzone aerial drop modules, both SOLD
$8 each shipped or both for $14 shipped. SOLD
I also have 3 Hobby zone sonic combat modules for sale
$8 each shipped or all 3 for $20 shipped
|
Unknown |
Yesterday 04:58 PM
by makya
|
5 |
121 |
| Wanted |
|
Posted by: nige838 / United States, TX
Looking for langing gear for a .40-.60 sized plane...let me know what you have...
|
Unknown |
|
2 |
84 |
| For Sale |
|
Posted by: SilentHunter / United States, Death Valley
I have some NIB Gemini Jets
1 777 air india
1 dc-9-30 TWA
1 757 National Airlines
1 md-11 Delta
Plus a 1/72 Red Arrows Hawk
All in great condition, unopened
|
Unknown |
|
0 |
45 |
| Sold |
|
Posted by: bruff / Gilbert, Az
Selling two electric retracts for 3mm strut wire.
Similar size as the E-flite 10-25 size.
Asking $30.00 plus shipping for the pair
Thanks,
Bob
Also if you use paypal shipping is on me is the...
|
Unknown |
|
2 |
211 |
| For Sale |
|
Posted by: bruff / Gilbert, Az
Rohm Air tri-gear retracts
Got these with a jet project I bought.
Going with electric retracts.
These are air up and air down.
I far as I can tell these are new, old stock.
Good for up to 15...
|
Unknown |
May 13, 2013 01:31 PM
by bruff
|
0 |
139 |
| Wanted |
|
Posted by: skywarp1 / South Central......Kansas
I have all the spares I need to resurrect my trust PZ FW-190 except the spinner. If anyone has one they are willing to sell I'll take it. If you want to give it away that is cool too, I will pay...
|
Unknown |
|
0 |
38 |
| For Sale |
|
Posted by: lectroglide / United States, WA, Puyallup
Have some thin 20mil x400mil CA hinges for sale and thiers 24 in a bag $3.50 mailed in an envelope..........these are perfect for most park flyers! when these sell out will be getting more.....o
|
Unknown |
|
5 |
86 |
| For Sale |
|
Posted by: epoxyearl / United States, MD, Elkton
This is a handy lil' wood plane 3" long, 1" blade,easy adjustment..Constructed of metal,unknown manufacturer. I know planes ,and this is a good one...I got this in an estate box of stuff,and I...
|
Unknown |
|
0 |
121 |
| Sold |
|
Posted by: HydroPilot / United States, ID, Idaho Falls
Robart UX-225 set of diamond treaded wheels. Never opened.
This is a Pair of 2 1/4" Scale...
|
Unknown |
|
2 |
104 |
| For Sale |
|
Posted by: HydroPilot / United States, ID, Idaho Falls
This is a old glow engine test stand and it can be clamped in a vise to hold it or similar clamp.
This was given to me by a friend long ago, but I am electrics, so not being used here.Enya 45 is...
|
Unknown |
|
0 |
81 |
| Wanted |
|
Posted by: JetMech2002 / United States, MO, Sedalia
Wanted to buy Hi-Point prop balancer. PM info, and price details.
Thank you
|
Unknown |
|
5 |
59 |
| For Sale |
|
Posted by: micron5
http://www.rcgroups.com/forums/showthread.php?t=1829146
|
Unknown |
|
3 |
84 |
| For Sale |
|
Posted by: CADILLAC200 / United States, CA, Covina
UP FOR SALE IS A
DREMEL 4 IN. TABLE SAW
THIS IS A USED SAW IN GOOD WORKING ORDER
$165. SHIPPED LOWER 48 STATES
PayPal
FRANK L.------ Southern Ca. 91724----- CELL 626 665 3083
|
Unknown |
|
0 |
164 |
| For Sale |
|
Posted by: Broken Wings
I had to buy a length of this material to build the exhaust tunnel in my model. I only used about 6" of it...
I've got 33-1/2" left. $60 shipped...? offers....
It's fairly High Temp.
G-3...
|
Unknown |
|
0 |
79 |
| For Sale |
|
Posted by: BWEC10 / United States, CA, Simi Valley
Hey guys, if you're looking for a customized Night Flying LED strip light kit for your plane or multi-rotor, I can help you out!!
I've got all the colors, red, green, blue, white, and RGB for any...
|
Unknown |
May 12, 2013 11:22 AM
by BWEC10
|
0 |
125 |
| For Sale |
|
Posted by: Aurora9
5.9 oz 199 GSM 2X2 twill Carbon Fiber fabric designed for American Aerospace industry use. Chinese quality is incosistent at best, this material is weaved in the US by a supplier for ballistics, and...
|
Unknown |
|
0 |
57 |
| For Sale |
|
Posted by: bah7566 / Colorado
Dave Brown Lite Flite Wheels 2 3/4" w/tread NIP.
$8.50 shipped to the lower 48 US States. Pay Pal accepted.
Thanks for looking,
Bruce
|
Unknown |
|
0 |
41 |
| Sold |
|
Posted by: pugstrip / n.e.michigan
trim and regular irons....eflite driver set...great planes sanding bars..
hardly used
32.00 shipped pp
|
Unknown |
|
3 |
134 |
| Sold |
|
Posted by: Bonestockz06 / United States, NJ
One Brand New Large Size T-shirt. 100% Gilden Pre-Shrunk Cotton. $13 Shipped anywhere in the USA. 1 Available. Paypal only.
|
Unknown |
|
2 |
163 |
| For Sale |
|
Posted by: Bonestockz06 / United States, NJ
One Brand New XL T-shirt. 100% Gilden Pre-Shrunk Cotton. $13 Shipped anywhere in the USA. 1 Available. Paypal only.
|
Unknown |
|
0 |
86 |
| For Sale |
|
Posted by: Mike Fortune / United States, TN, Collierville
I have 21 partial rolls of covering for sale. Most were used for trim schemes and only a small protion was trimmed from the end. No roll is less than 1/2 but almost all is nearly full legnth. The...
|
Unknown |
|
2 |
268 |
| For Sale |
|
Posted by: Mike Fortune / United States, TN, Collierville
1 roll Carl Goldberg UltraCote #881 Silver $10.00ea
1 roll Hangar 9 UltraCote #905Corsair Blue $10.00ea
3 rolls Carl Goldberg UltraCote #873 Deep Blue $10.00ea
1 roll Carl Goldberg UltraCote #875...
|
Unknown |
|
4 |
348 |
| For Sale |
|
Posted by: ED3 / USA, CA, Los Angeles
not much to say, new in the bag
$7 shipped to the lower 48 ONLY
if you want i can open the bag and tested for you, i wont be responsible for any non working units
thanks for...
|
Unknown |
|
8 |
272 |
| Wanted |
|
Posted by: rcrick10 / United States, CA, Madera
Hi guys does anyone have a robart pump that's not used any more. Let me know thanx, rick
|
Unknown |
|
4 |
81 |
| Sold |
|
Posted by: gravityking / United States, CA, Woodland
Not going to work for my project. $12.00 pair shipped to the 48 states, PayPal or USPS money order.
Specs:
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm...
|
Unknown |
|
5 |
244 |
| Sold |
|
Posted by: gravityking / United States, CA, Woodland
To small for my P-40 wheels. $21.00 for the pair shipped to the 48 states, PayPal or USPS money order.
Specs:
Length to axle centerline: 136mm (not inc pin)
Retract Mounting Pin: 5mm
Axle: 4mm...
|
Unknown |
|
2 |
127 |
| For Sale |
|
Posted by: gravityking / United States, CA, Woodland
Used for 2 flights and just to big for my power plant. $45.00 & free shipping to the 48 states. PayPal or USPS money order.
Will be disassembled and blades numbered for shipping.
Hope you can use...
|
Unknown |
|
0 |
135 |
| For Sale |
|
Posted by: JMDESIGNS / United States, MO, St Charles
I have for sale a Dremel model 580 table saw in good working condition. Includes a blade and fence. Blade tilts and adjusts for depth and angles. No rust or broken plastic.
140.00 + 20.80 for...
|
Unknown |
May 11, 2013 09:18 PM
by 7up
|
1 |
197 |
| Sold |
|
Posted by: hobbyfun100 / United States, MD, Cambridge
Hobbico Torq Master 180 heavy duty deluxe 12 volt starter. Used only a few times. Looks new, Tower $39.99. Comes with new, unused, wood starter-battery box. All corners have been rounded, wood sanded...
|
Unknown |
|
3 |
78 |
| Sold |
|
Posted by: Sgt Ski / United States, TX, Abilene
I have a New 2 3/4 Inch Tru Turn 3-Blade Spinner for sale. Comes with center screw and spinner adapter. Asking $20 Shipped to the lower 48.
|
Unknown |
|
0 |
61 |
| Wanted |
|
Posted by: KenSue / United States, MS, Gulfport
I'm looking for a cowl for an older Hangar 9 25% Cap 232. Here's the link to the cowl. If anybody has one they want to part with, shoot me a PM please.
...
|
Unknown |
May 11, 2013 09:01 AM
by KenSue
|
0 |
22 |
| For Sale |
|
Posted by: Fastandlow / N. Scituate, RI
Have a brand new low profile # 530 Tri gear retract set. These are air up and spring down. Built in safety feature for air loss. The struts are 7/16 in. diameter
$275 free shipping
|
Unknown |
|
0 |
106 |
| For Sale |
|
Posted by: clandestoy / USA, NY, Middletown
.
New in package Acadian 1/7 or 1/8 scale RC WW-II German Pilot $8.00 shipped
Please PM me as I do not check my ads on a daily basis
|
Unknown |
|
0 |
104 |
| For Sale |
|
Posted by: mdtang / United States, TX, Crosby
3 rolls 3m blenderm 1" or 1/2" x 15' hinge sealing flexible foamy tape $12 shipped
3m Hinge sealing tape for use on foamys and to seal gaps on hinge lines. This is a clear, flexible tape that is 1"...
|
Unknown |
May 11, 2013 02:43 AM
by mdtang
|
0 |
88 |
| Off Site |
|
Posted by: HydroPilot / United States, ID, Idaho Falls
Closed
|
Unknown |
|
0 |
97 |
| Sold |
|
Posted by: iceman65 / United States, CA, Malibu
Great Planes CG Machine in good condition. $20 shipped. Thanks
|
Unknown |
|
4 |
141 |
| For Sale |
|
Posted by: iceman65 / United States, CA, Malibu
Hi;
Digital Variable Load Voltmeter by Hangar 9. Brand new in Box. Just received brand new as a replacement for a faulty one. Already purchased one from Duralite so this one has to go. $35 Shipped...
|
Unknown |
|
0 |
92 |
| For Sale |
|
Posted by: JC Spohr / United States, IL, Glen Carbon
These AeroWorks wing and stab bags are lightweight, yet heavy enough to protect your wings and stabs from hanger rash or small nicks and dents from transporting too and from the flying field.
...
|
Unknown |
|
0 |
54 |
| For Sale |
|
Posted by: unclegeorge / United States, FL, Sarasota
Drill Baby Drill! Size does make a difference when it comes to these three 25" drill bits.
Get the extra length needed for boring jobs where standard length bits won't reach. Made of polished...
|
Unknown |
|
0 |
76 |
| Wanted |
|
Posted by: MAMBA2200 / United States, TN, Dandridge
like the title states looking for a good watt meter let me know what you got
|
Unknown |
|
0 |
53 |
| For Sale |
|
Posted by: HUGH DURDEN / United States, GA, Macon
Super Nice Custom Trailer with new cover 2195.00 must see!
pm for details
|
Unknown |
|
1 |
207 |
| For Sale |
|
Posted by: HydroPilot / United States, ID, Idaho Falls
Dubro 1 inch tail wheel for .60 sized planes/ 3/32" axle hole aluminum wheel.
$6.50 shipped to your door in the USA, PayPal please!:)
|
Unknown |
|
5 |
83 |
| Off Site |
|
Posted by: HydroPilot / United States, ID, Idaho Falls
Closed
|
Unknown |
|
0 |
64 |
