| For Sale |
|
Posted by: txshan130 / United States, TX, Katy
For sale is a PZ Ember. Fly great. It is in pretty good condition has been taken good care of. The little piece connecting the main frame to the wing broke, but was fixed with a tiny dab of hot glue....
|
Unknown |
|
0 |
25 |
| For Sale |
|
Posted by: RCGill / USA, MI, Olivet
I have 2 flights on this and I cartwheeled it on my rough airfield landing. Other than the dented wing tips she is in very good condition. Flies great but you really need a smooth surface for...
|
Unknown |
|
2 |
49 |
| For Sale |
|
Posted by: moodified13 / United States, LA, Bossier City
I've accumulated way too much micro stuff.
V1 Beast Brick (2 available). $40
Sbach Brick. $30
Stryker Brick. $30
GEE BEE brick. $30
Two BL2500 with props and mounts. $23 each shipped...
|
Unknown |
|
0 |
70 |
| Wanted |
|
Posted by: HALO3 / United States, CA, Orange
The one from banana hobby http://www.bananahobby.com/3-ch-blitzrcworks-mini-f-35-lightning-II-v2-w-gyro-arf.html Please send me a pm
|
Unknown |
|
3 |
139 |
| For Sale |
|
Posted by: jkishan16 / United Arab Emirates, Dubai
Up for sale is a Brand new Turnigy 2830 - 1000KV motor:
With the following Specifications:
Dimension: 32mm x 28mm, 48mm(with shaft)
Weight: 54g (kv1000) (not including connectors)
Diameter of...
|
Unknown |
|
0 |
60 |
| Wanted |
|
Posted by: MadAndronicus / United States, TX, Denton
Hello, I'm looking for Parkzone Night Vapor parts. Please send me a private message if you have some.
Thanks.
|
Unknown |
|
2 |
79 |
| Wanted |
|
Posted by: SkiCrazy / United States, MN, St Cloud
I'm looking for a set a micro LED lights for the Hobbyzone Champ, preferably a set built by SF Design Solutions, which are discontinued. A set for the Parkzone T-28 would be nice as well.
...
|
Unknown |
|
0 |
23 |
| For Sale |
|
Posted by: joker24458 / United States, OH, Kent
Hi all,
I purchased this Thunder Power 1s Quad Pocket charger a while ago, but now, as I am getting out of micros (for the most part, at least), I am seling it. It is in mint condition and the...
|
Unknown |
|
0 |
50 |
| For Sale |
|
Posted by: Kevinfred / United States, IN, Fort Wayne
Flown less than a dozen times, never off concrete/asphalt...
Nose cone is a little 'squeezed' looking and there is a 3mm spot on the edge of the wing that is hardly noticeable (hence the 8.7 of...
|
Unknown |
|
1 |
123 |
| Sold |
|
Posted by: joker24458 / United States, OH, Kent
Hi all,
As some of you may know, my Mini Vapor rudder servo has been constantly jamming over the past couple months, so I contacted HH and they sent me the Mini Vapor receiver. However, upon...
|
Unknown |
|
0 |
72 |
| For Sale |
|
Posted by: rapster / United States, IL, Belleville
Hi,
I just got this 1 month ago, flew a handful of flights and has been sitting in it's box since then. Never crashed, no repairs, flies excellent. Asking $60 shipped. Thanks.
|
Unknown |
|
3 |
252 |
| Sold |
|
Posted by: hpiflux
I got no use for it.
Like new condition just sits in the box.
$70 or trade for other micro plane/heli . Flew only 4 times .
http://www.horizonhobby.com/products...r-bnf-PKZU1280
|
Unknown |
|
3 |
338 |
| Wanted |
|
Posted by: unixphreak64 / United States, TX, Webster
I am looking to replace my old livery, would like near mint or NIB Kyosho Minium Edge 540, Decathlon, and Eagle bipipe. If you have the Kirby Chambliss 540 even better.
|
Unknown |
|
1 |
104 |
| For Sale |
|
Posted by: Marekv
I got this plane brand new on Wednesday for $169 plus tax. It flew for about two minutes. I realized I don't like it. It's too light and too small for me. I will stick my Eflite Apprentice. 58"...
|
Unknown |
May 16, 2013 10:37 PM
by Marekv 
|
5 |
319 |
| Sold |
|
Posted by: 3d astronaut 
Selling my t28 that has less than 10 flights on it. I have two and dont fly either of them near enough so one has to go. I tried detailing ever knick and scrape so if you have questions, feel free to...
|
Unknown |
|
4 |
264 |
| Wanted |
|
Posted by: MadAndronicus / United States, TX, Denton
I would like a UMX SBACH 3D or Carbon Cub for a hundred bucks or less, is that too much to ask!??!😄
Message me if you can help me out, thanks!
-Andrew
|
Unknown |
|
5 |
114 |
| Sold |
|
Posted by: daddyrabbit1954 / United States, FL, Tampa
This is a new 1/25 scale DH.2 kit The kit is manufactured by one of the members here on RCG. Will sell for a shipped price of $35. Payment by Paypal, please. PM me if interested.
Ember parts...
|
Unknown |
|
6 |
281 |
| Sold |
|
Posted by: 3d astronaut
Had a minor crash: I tossed it, battery was dead and lasted 2 seconds, then dropped out of the sky landing nose first. it has been repaired and flies like its brand new. It took me over 10 pictures...
|
Unknown |
|
1 |
192 |
| For Sale |
|
Posted by: rpstar / Dacula, GA
As shown in the pic installed on a handtoss glider I've got the electronics from the flyzone albatross except the motor/gearbox is the one from the playmate instead. Hence, it's essentially the...
|
Unknown |
|
1 |
185 |
| For Sale |
|
Posted by: pro bro steve / Sammamish WA
Up for grabs
Great planes .10 Size Mechanical Retracts new in box
$12 shipped USA
Pay Pal.
|
Unknown |
|
2 |
129 |
| Sold |
|
Posted by: scharlach
For Sale: Flyzone 3 Ch./ 2.4ghz Transmitter + 3 Ch. Brick Receiver with
built in Brushed ESC + 1S/130mah Battery $25 Shipped CUS
Both in excellent working condition. Paypal =...
|
Unknown |
|
1 |
76 |
| Sold |
|
Posted by: Johnnymeg / United States, CA, Arcadia
I have been getting alot of requests from all the guys at the flying field to build them a Mini popwing. After seeing me and a few of my buddies Crash and Smash these things and then pick them up and...
|
Unknown |
|
163 |
9,374 |
| Wanted |
|
Posted by: PiperCub49 / United States, ME
I have an AR6400 that is in need of a large servo gear. If anyone has one, I would appreciate it. :)
Thanks guys,
Kody
|
Unknown |
|
1 |
50 |
| For Sale |
|
Posted by: twoplanekid / Urbana, Ohio
Main Wing: Micro Citabria by ParkZone (PKZ3120) Reg $8.99
I wish Horizon would introduce some lighter flyers as in the old ultra micro Cessna 210 and Citabria lines. The Citabria wing weight is...
|
Unknown |
|
8 |
158 |
| For Sale |
|
Posted by: Jyester / Massachusettes
hello again i have for sale a as3x board and 3 linear servos out of Sbach the fourth wasnt repairable. No motor! systems works perfectly! i still have motor connector motor it self wasnt luck either....
|
Unknown |
|
4 |
375 |
| For Sale |
|
Posted by: helifrek / United States, TN, Clarksville
So I got a great idea the other night and tried to fly my one week old cub in the dark :) ended up hitting a power line with the right wing. crunched up the nose a little and ripped the right wing...
|
Unknown |
|
2 |
302 |
| For Sale |
|
Posted by: MustangAce17 / Ocala,Florida
$45 for quick sale, PayPal only, shipping $5, thanks Kyle
|
Unknown |
|
0 |
97 |
| For Sale |
|
Posted by: Captain Ron / Las Vegas, NV.
Selling my used Parkzone ultra-micro P-51 Mustang. It does have some creases, dings and scrapes from the previous owner. It's only cosmetic and does not affect how it flys. It flys fine. It will come...
|
Unknown |
|
6 |
301 |
| Sold |
|
Posted by: Tampatexan / United States, FL, Palm Coast
I got this as part of a package deal and don't want/need it. Has new tail feathers, but fuselage is rough. Includes 2 batteries and 2 spare props/spinners. Asking $30 shipped. Thanks for looking
|
Unknown |
|
0 |
125 |
| Sold |
|
Posted by: abletowinginc / USA, FL, St Augustine
also listed on ebay under treasurechestpawn this a like new version 2 ladybird with devo f4 has monitor built into transmitter. works perfectly have a emergency in family so selling some things need...
|
Unknown |
|
1 |
119 |
| Sold |
|
Posted by: mjbennett9 / United States, OH, Bellbrook
http://www.rcgroups.com/forums/showthread.php?t=1863568
|
Unknown |
|
1 |
111 |
| For Sale |
|
Posted by: srdjan.n.74 / United States, OK, Tulsa
Price Drop! Everything for $45.00
Almost new airframe and parts, all in excellent shape:
-.Fuselage with Electronics: Night Vapor (PKZU1161) - HH price is $79.99
- Tail Skid: Vapor/Night...
|
Unknown |
|
4 |
300 |
| Sold |
|
Posted by: 3DCrazy516
This is a brand new ParkZone UM P-40 Warhawk BNF. Recently received as a gift and I have too many planes, so this needs to go. Like I said this is brand new never flown. Only took it out of the box...
|
Unknown |
May 13, 2013 10:02 PM
by drats
|
1 |
213 |
| For Sale |
|
Posted by: aviator24 / Flint, Michigan
I have 3 of these. Flying one, keeping another, selling ONE. It is brand new in the box, never been opened. This does not have the controller. It does come with a charger, lipo and just needs to...
|
Unknown |
|
1 |
281 |
| For Sale |
|
Posted by: Wildcat29
i bought this and flew it a few times..had one crash and lost the noise/batter door..everything works fine..please look at pics..
make offer but no low ballers..will ship in original box, so...
|
Unknown |
|
1 |
127 |
| For Sale |
|
Posted by: Flyboy70 / Western Nebraska
For sale a used Hyper Taxi..IT has its share of creases ,tape and glue.. But it still flys great. The electronic are good..I have tried to show it well with the pisctures. Includes Battery and...
|
Unknown |
|
0 |
143 |
| Wanted |
|
Posted by: flyinjrc74 / United States, MI, Niles
Looking for some 350-600mah 2s lipos
And 3s 400-700mah lipos.
Please no puffed or junk btteries. I need some for a Radix 3d and Riot bipe.
Feel free to post pics and price, pm is fine...
|
Unknown |
|
1 |
126 |
| For Sale |
|
Posted by: MustangAce17 / Ocala,Florida
I have two, one brand new pulled from my jet that was changed to dsm and the other is barely used
I would like $20 plus shipping for the new one and $15 plus shipping for the used one
also have...
|
Unknown |
|
0 |
106 |
| For Sale |
|
Posted by: fishmanpuffer / United States, WI, Antigo
I am selling 10 air frames and 1 new flying wing air frame 4 radios 3 are new never used and 4 lipo chargers 3 new never used 1 power mod does not work (bad actutors)Motor and rx works 1 working...
|
Unknown |
|
2 |
261 |
| For Sale |
|
Posted by: twoplanekid / Urbana, Ohio
Overstock special (SPMAR6410) only $32 shipped to lower 48
Bringing 2.4GHz DSM2®/DSMX® technology to ultra micro aircraft. The AR6410 DSMX micro receiver with integrated brushed speed controller...
|
Unknown |
|
11 |
376 |
| For Sale |
|
Posted by: tenacious101010 / United States, FL, Tampa
Here is a beautiful condition SU-26 , no damage never crashed. It comes with instructions and DC charger, no battery. Bottom of the wingtips have minor scuffing. $85.00 shipped to CONUS addresses....
|
Unknown |
|
2 |
125 |
| Wanted |
|
Posted by: g_kandylakis / Greece, Central Macedonia, Thessalonika
Hi,
anyone out there have an AR6400L? I just burned my old one...
Would a AR6410L be the same with a DX6i RX ? (I do not need the DSMX)
George
|
Unknown |
|
1 |
54 |
| Sold |
|
Posted by: Jbray / Raleigh, NC
NIB Micro Stryker 180
89.00 shipped US
|
Unknown |
|
4 |
130 |
| Sold |
|
Posted by: Sell...er / Independence,Missouri
none
|
Unknown |
|
0 |
206 |
| For Sale |
|
Posted by: bladeguy5 / United States, MD, Waldorf
Up for sale is a lightly used F4U Corsair.. its had one repair to the wing and another to the elev... currently has a locked up ail servo as well.. other than that it flew great
|
Unknown |
May 11, 2013 10:31 PM
by drats
|
3 |
131 |
| For Sale |
|
Posted by: daddyrabbit1954 / United States, FL, Tampa
For sale is my Parkzone Sukhoi SU26m. Includes airframe and all electronics, extra new prop. No batteries or charger. Except for a few small nicks, the only damage is on the underside of the nose,...
|
Unknown |
|
0 |
214 |
| Sold |
|
Posted by: mrfliboy / USA, IL, Round Lake
Pics later this evening.
Complete RTF Original Vapor.
Vapor (used 8 out of 10 condition)
Transmitter
Charger
1 Lipo
Original Box/manual
|
Unknown |
|
3 |
200 |
| Sold |
|
Posted by: daddyrabbit1954 / United States, FL, Tampa
Following are WW1 and WW2 laser cut balsa micro size kits, suitable for micro R/C equipment and flying. Except as noted, kits do not include the plans nor any vac-formed parts, only the laser cut...
|
Unknown |
|
2 |
184 |
| For Sale |
|
Posted by: tenacious101010 / United States, FL, Tampa
Perfect condition except for one "wheel pant" front missing., otherwise this is pristene. Comes with instructions, no battery or charger. $85.00 shipped to CONUS addresses. Payment by Cash or US...
|
Unknown |
|
0 |
97 |
| For Sale |
|
Posted by: tenacious101010 / United States, FL, Tampa
I have a nicel condition E Flite Beast. bottom right wing was cracked at fuse but epoxy repaired, otherwise beautiful. Comes with instruction book. No charger or battery. $85.00 shipped to CONUS...
|
Unknown |
|
0 |
132 |
